SmartTech Australia integrates the world's leading heavy equipment technology across payload management, automated lubrication, cabin air filtration, proximity detection, machine control and site-wide wireless connectivity. One trusted partner, fully supported across five states.
Trusted Technology Partners
From the cab to the control room, SmartTech Australia integrates world-leading technology across payload management, worker safety, automated lubrication, cabin air quality, machine control and site-wide connectivity. Every solution is supplied, installed and supported by our national team.
Real-time payload data for loaders, excavators, haul trucks and conveyors. Maximise yield, eliminate overloading and produce legally traceable load records every shift.
Learn More
Dedicated onboard weighing for front lift, rear lift and hook lift refuse vehicles. Accurate bin weights, automated data capture and compliance-ready reporting for waste fleet operations.
Learn More
TrackWeight delivers accurate gross vehicle mass data in real time, helping operators stay within legal load limits and reducing wear across the entire haulage fleet.
Learn More
SKF Lincoln systems deliver precisely measured grease to every bearing, pin and bushing while the machine is running. Eliminate manual greasing, reduce component wear and prevent unplanned shutdowns.
Learn More
ISO 23875 certified pressurised cabin filtration removing 99.95% of respirable particles including silica dust, diesel particulate and chemical aerosols. Continuous monitoring via BMair Connect.
Learn More
PROX-EYE uses AI-powered cameras to continuously scan for people, vehicles and obstacles, delivering instant in-cab alerts before contact occurs. 360-degree awareness with zero blind spots.
Learn More
GKD Technologies machine control systems actively limit excavator and crane movement near overhead hazards and exclusion zones. Protect personnel, infrastructure and equipment from incidents.
Learn More
Rajant's self-healing wireless network keeps every machine connected across open cut pits, underground tunnels, ports and remote civil sites. No single point of failure. Connectivity that moves with your operation.
Learn MoreSmartTech Australia is not just a supplier. We assess your operation, integrate the right technology across your fleet and support it for the life of the equipment. One relationship. End-to-end accountability.
We start with your fleet, your site and your operational challenges. Our specialists identify where technology can reduce cost, improve safety and drive measurable efficiency gains before a single product is recommended.
We supply, install and commission the right technology for your equipment. Our technicians are based across five Australian states, ensuring fast deployment and minimal disruption to your operation.
Ongoing service, calibration and maintenance from our national team. With local technicians in Queensland, New South Wales, Victoria and Western Australia, help is never far away when you need it.
SmartTech Australia deploys technology solutions across nine industries. Each industry page details which solutions apply, how they are deployed and what operational problems they solve.
Payload management, proximity detection and automated lubrication solutions for open cut operations across coal, iron ore, gold and bulk commodities.
Kinetic mesh networking, cabin air filtration and proximity detection built for the unique challenges of underground drives, declines and stope operations.
Precision payload measurement for loaders and conveyors, automated lubrication for crushers and screening plants, and cabin air protection for quarry operators.
Payload tracking, height and slew control, proximity detection and cabin air filtration for road, bridge and infrastructure projects across Australia.
Wireless connectivity, cabin air filtration and machine control systems suited to TBM drives, drill and blast tunnels, and underground civil infrastructure projects.
Payload management for railcar loading operations, automated lubrication for rail maintenance equipment and proximity detection around active rail corridors.
SOLAS-compliant container weighing, conveyor belt scales, reach stacker payload systems and Rajant mesh networking for port and bulk terminal operations.
Onboard weighing for front, rear and hook lift refuse vehicles, cabin air filtration for waste operators and proximity detection around busy transfer station environments.
Our team is nationwide across Australia.
Common questions from site managers, procurement teams and operations leaders about SmartTech Australia's technology solutions for heavy industry.
SmartTech Australia supplies, installs and supports eight technology solutions for heavy industry across mining, quarrying, civil construction, ports, rail, waste and agriculture. These are Loadrite onboard weighing systems for loaders, excavators, haul trucks, conveyors and reach stackers; Loadrite waste and recycling weighing for refuse vehicles; TrackWeight onboard truck scales for gross vehicle mass management; SKF Lincoln automated lubrication systems; BMair cabin air filtration for ISO 23875 compliance; Correct AI PROX-EYE proximity detection; GKD Technologies height, slew and load control; and Rajant kinetic mesh wireless networking.
All solutions except Rajant are fitted to or operate alongside heavy mobile equipment. Rajant provides site-wide wireless network infrastructure across large operational sites. SmartTech Australia is part of Seven Group Holdings and operates five offices across Queensland, New South Wales, Victoria and Western Australia.
SmartTech Australia is a full-service technology integrator. We supply, install, commission, calibrate and provide ongoing support for all solutions we represent. We are not a reseller that drops equipment at the gate. Our technicians are based across five Australian states and carry out on-site installations across mining, quarrying, civil construction, port, rail, waste and agriculture operations nationally.
For Loadrite onboard weighing systems that require National Measurement Institute certification, SmartTech Australia holds NMI accreditation and can perform Legal for Trade calibrations on site. For SKF Lincoln automated lubrication systems, our technicians complete manufacturer training and carry out full commissioning including pump sizing, line routing and point-by-point verification. Every solution we install is supported by our national team for the life of the equipment.
Yes. All solutions SmartTech Australia supplies are designed for retrofit installation on existing heavy mobile equipment. There is no requirement to purchase new machines or modify original equipment manufacturer systems. Loadrite weighing systems, BMair cabin filtration units, Correct AI PROX-EYE cameras, GKD Technologies control systems and SKF Lincoln lubrication systems all use machine-agnostic mounting and connection hardware that suits virtually all major OEM brands including Caterpillar, Komatsu, Hitachi, Liebherr, Volvo, Doosan, John Deere and others.
Our technicians assess your specific machine models before any installation to confirm compatibility and identify the correct mounting configuration. Where a particular machine presents a non-standard fitment challenge, SmartTech Australia will advise on the appropriate approach before work commences. Contact us with your machine make, model and year for a pre-installation compatibility check.
SmartTech Australia services eight industries: open pit mining, underground mining, quarrying and aggregates, civil construction, tunnelling, rail and freight, port and bulk material handling, and waste and recycling. Each industry has distinct equipment types, operational challenges and regulatory requirements, and our solutions are deployed accordingly.
In open pit mining and quarrying, Loadrite payload management and SKF Lincoln automated lubrication are the most common deployments alongside BMair cabin filtration and Correct AI proximity detection. In civil construction and tunnelling, GKD Technologies height and slew limiters and Rajant kinetic mesh networking are frequently specified. In port operations, Loadrite reach stacker scales and conveyor belt scales are standard. In waste and recycling, the Loadrite waste solutions range covers front lift, rear lift and hook lift vehicle weighing. Contact SmartTech Australia to discuss the specific requirements of your industry and operation.
Yes. SmartTech Australia operates five offices across Australia: Brisbane (Northgate QLD), Townsville QLD, Sydney (Caringbah NSW), Melbourne (Campbellfield VIC) and Perth (Osborne Park WA). Each office is staffed with sales and technical personnel who service operations in their respective state and region.
Our Brisbane and Townsville teams service Queensland operations including the Bowen Basin, Darling Downs and North Queensland. Our Sydney team covers New South Wales and the ACT. Our Melbourne team covers Victoria and Tasmania. Our Perth team covers Western Australia including the Pilbara, Goldfields and South West. For remote site deployments outside major centres, SmartTech Australia can arrange fly-in fly-out or drive-in drive-out service visits. Call 1800 655 860 to be connected to your nearest office.
SmartTech Australia represents six world-class technology brands: Loadrite (onboard weighing), SKF Lincoln (automated lubrication), BMair (cabin air filtration), Correct AI (proximity detection), GKD Technologies (height, slew and load control) and Rajant (kinetic mesh wireless networking). SmartTech Australia also distributes TrackWeight onboard truck scales.
SmartTech Australia is the world's largest Loadrite dealership, having held the Global Dealer of the Year award for seven consecutive years. As part of Seven Group Holdings, SmartTech Australia operates alongside WesTrac and Coates as one of Australia's leading industrial services businesses. Each brand partnership is exclusive or authorised, meaning SmartTech Australia carries full product knowledge, factory training, warranty support and direct supply chain access for every solution it represents.
Yes. SmartTech Australia is part of Seven Group Holdings (ASX: SVW), one of Australia's largest industrial services and investment companies. Seven Group Holdings also owns WesTrac, the authorised Caterpillar dealer for Western Australia and New South Wales, and Coates, Australia's largest equipment hire company. Being part of this group gives SmartTech Australia significant financial backing, national infrastructure and relationships across the heavy industry sector.
For customers, this means SmartTech Australia is not a small independent distributor that may be here today and gone tomorrow. It is a business with deep roots in Australian industry, a long-term commitment to the sectors it serves and the resources to honour warranties, maintain parts supply and provide ongoing service support at scale. It also means SmartTech Australia can coordinate deployments across multiple states simultaneously, supported by the broader Seven Group network.
Yes, and this is one of SmartTech Australia's key advantages as a multi-solution integrator. Multiple technologies can be installed on the same machine in a single deployment, reducing site downtime and coordination effort. A typical excavator, for example, might be fitted with a Loadrite excavator scale, a Correct AI PROX-EYE proximity detection system, a BMair cabin air filtration unit and an SKF Lincoln automated lubrication system in one scheduled visit.
Because SmartTech Australia represents all solutions internally, there is no need to coordinate multiple contractors, manage separate warranties or deal with conflicting installation schedules. One company, one relationship, one invoice. Our technicians are trained across all product lines and can plan a combined installation that minimises machine downtime and maximises the value of each site visit. Contact SmartTech Australia to discuss a multi-solution fitment for your fleet.
