Your SMART Partner

Cab Air Upgrades and Building the Operator Health Case

How do you build a business case for a cab air upgrade? Build it on four things management already cares about. Show the exposure data from monitoring, the legal duty under the new Workplace Exposure Limits, the gap between the current cab and the standard, and the full cost of fixing it against the cost […]

Do the New Workplace Exposure Limits Apply in Victoria?

Does the silica exposure limit change on 1 December 2026? No. Respirable crystalline silica stays at 0.05 mg/m3 as an 8 hour time weighted average from 1 December 2026. Silica is one of nine chemicals that work health and safety ministers held at current levels for further work, so its limit carries across unchanged into […]

Workplace Exposure Limits 2026 | Every Change in One Table

What is changing with Workplace Exposure Limits on 1 December 2026? On 1 December 2026, Safe Work Australia’s Workplace Exposure Limits replace the Workplace Exposure Standards as the legal limits for airborne contaminants. Many limits fall, 31 substances get a limit for the first time, including diesel particulate matter at 0.01 mg/m3, and silica stays […]

Best Cabin Air Filter for Heavy Equipment and How to Choose

What is the best cabin air filter for heavy equipment? The best system filters both fresh and recirculated air through HEPA media, adds activated carbon where diesel exhaust is present, and keeps the cab at positive pressure. ISO 23875 sets the benchmark of at least 20 Pa above outside air, carbon dioxide held near ambient, […]

Diesel Particulate Matter | New 2026 DPM Limit

What is the diesel particulate matter exposure limit in Australia? From 1 December 2026, the national Workplace Exposure Limit for diesel particulate matter is 0.01 mg/m3, measured as respirable elemental carbon over an 8 hour shift. Victoria keeps 0.1 mg/m3 until December 2029, and Queensland’s regulator lists the same transition. Controlling diesel exhaust needs HEPA […]