Your SMART Partner
On-Board Weighing › Loader Scales › L3180 SmartScale
Loadrite Range

Loadrite L3180 SmartScale

Legal for Trade NMI TESTING (CERTIFICATION UNDERWAY)

The Loadrite L3180 SmartScale uses weighing intelligence for more accurate, precise and faster loading. With a 5.7-inch colour touchscreen, CAN-bus digital sensors, and ground slope compensation, the L3180 delivers high-throughput weighing performance for quarries, mines, and civil construction operations across Australia.

The L3180 uses two 3D Inertial Measurement Unit (IMU) angle sensors to continuously monitor boom position and compensate for ground slope angle while the machine is on the move. By adjusting for lift speed and ground angle, the L3180 achieves the most accurate weighing data possible. With optional WiFi and cellular connectivity, InsightHQ cloud portal access, eTickets, Ticket at Gate, and 90-day transaction memory, the L3180 is a complete SmartScale solution.

Key Specifications
Display
5.7" Touchscreen
Connectivity
WiFi, Cellular (optional)
Data Storage
90 Days On-Device
Cloud Portal
InsightHQ Ready
Accuracy
Superior Ground Slope
Certification
NMI Testing
🇦🇺 The World's Largest Loadrite Partner
FAQs
Display5.7" colour touchscreen (800 x 480), sunlight readable
TouchscreenResistive touch
ConnectivityOptional WiFi module, optional cellular modem
GPSBuilt-in GPS/GLONASS
Power Supply12 or 24 VDC vehicular supply
Operating Temperature-10°C to 50°C (14°F to 122°F)
Protection RatingIP54 (indicator), IP67 (sensors), IP69K (pressure transducers)
DimensionsW166 x L270 x D81 mm (6.5 x 10.6 x 3.2 in)
Weight1.3 kg (2.9 lbs) without bracket
ComplianceCE, UKCA, FCC, RCM, RoHS
Warranty3 years parts, 1 year labour
Weighing Intelligence3D IMU angle sensors compensate for ground slope and machine movement for superior accuracy
5.7" Colour TouchscreenSunlight-readable display with intuitive interface for fast operation
Weight PreviewIndicative weight at start of lift enables fast last-bucket adjustments at low lift height
90-Day Transaction HistoryStores 90 days of transactions on-device, accessible without internet connection
eTickets & Ticket at GateEmail load tickets or print remotely at the gate for paperless load management (requires LG500 Gateway)
In-Cab Performance MetricsTrack tonnes per hour, truck count, and daily totals in real-time
InsightHQ Cloud PortalOptional WiFi/cellular connectivity for remote production monitoring and inventory tracking
CAN-Bus Digital SensorsLR970 arm position sensors and LC985 pressure transducers for precise measurement
Compatible LoadersCaterpillar, Komatsu, Volvo, Liebherr, John Deere, Hitachi, Doosan, and all major brands
Installation LocationCab-mounted indicator with hydraulic pressure sensors on lift cylinders and IMU angle sensors on boom
Installation TimeTypically 4-6 hours by certified SmartTech technician
CalibrationNMI accredited calibration included with installation (When approved)
TrainingOperator training provided on-site after installation
SupportSmartTech field service teams available nationally across Australia
Suited for

Mining & Resources, Quarries & Aggregates, Concrete & Asphalt Production, Waste & Recycling, Civil Construction, Agriculture & Grain Handling, Port & Logistics Operations, Soil & Landscape Supplies, and more.

Weighing Intelligence

Superior Accuracy

The L3180 uses weighing intelligence for more accurate, precise and faster loading in a wide range of conditions, adjusting for ground slope, rough terrain, operator technique and machine movement.

5.7 inch touchscreen
5.7" Colour Touchscreen

Sunlight-readable touchscreen display, twice the size of previous generation indicators for better visibility and control

Ground Slope Compensation
Ground Slope Compensation

Dual 3D IMU angle sensors continuously monitor boom position and compensate for ground slope while on the move

In-Cab Performance KPIs
In-Cab Performance KPIs

Track tonnes per hour, truck count, and daily totals in real-time to monitor performance and achieve targets

eTickets Ticket at Gate
eTickets & Ticket at Gate

Send load tickets by email or print remotely at the gate for contactless paperless ticketing workflow

90 Day Transaction Memory
90-Day Transaction Memory

Built-in 90-day transaction history with ability to reprint previous tickets directly from the loader

WiFi Cellular GPS Ready
WiFi, Cellular & GPS Ready

Optional WiFi and cellular modules enable InsightHQ cloud connectivity with built-in GPS for location tracking

Complete Your System

Printers & Connectivity

Maximize the value of your L3180 investment with in-cab printing, cloud connectivity, and seamless data integration.

Loadrite LP950 in-cab printer
In-Cab Printer

LP950 Printer

Print time-stamped load dockets directly from the loader cab. Compatible with all Loadrite systems and supports Ticket at Gate when paired with LG500 Gateway.

Learn More
InsightHQ cloud portal
Cloud Portal

InsightHQ

Access production and performance metrics from any web browser or mobile device. L3180 is InsightHQ ready out of the box with built-in WiFi, cellular, and GPS.

Learn More
eTickets and Ticket at Gate
Paperless Ticketing

eTickets & Ticket at Gate

Send load tickets directly to email or print wirelessly at the gate via LG500 Gateway. Faster turnaround, improved site safety, paperless workflow.

Contact SmartTech
Data Communications

Connected to InsightHQ and Beyond

Loadrite offers multiple data communications options to suit any site infrastructure.

Built-in WiFi (L5000) and optional WiFi module (L3180, L2180)
Built-in cellular (L3180) and optional cellular modem
900 MHz and 2.4 GHz radio link for site-wide wireless
Ethernet network connection for fixed plant or office
Loadrite Data Module for store-and-forward offline sites
eTickets: send load data to any email address instantly
LG500 Gateway for Ticket at Gate remote printing
API integration with ERP, WMS, and dispatch systems
Product Range

Explore the Full Loadrite Loader Scale Range

From basic payload monitoring through to fully connected cloud-ready systems, there is a Loadrite loader scale for every machine and every operation in Australia.

Frequently Asked Questions

Loadrite L3180 SmartScale

Common questions about the L3180 wheel loader scale, installation, Legal for Trade certification, connectivity, and getting the most from your system in Australia.

The L3180 uses pressure transducers mounted in the loader's hydraulic lift system combined with two 3D Inertial Measurement Unit (IMU) angle sensors. As the bucket is raised, the system continuously monitors boom position and takes multiple weight readings across the lift arc using multiple-point triggering. It then calculates the payload using speed compensation and ground slope correction, compensating for terrain angle and machine movement in real-time.

The result is displayed on the 5.7-inch touchscreen before the load is dropped into the truck. The operator never needs to stop mid-cycle or take additional steps. Weighing is automatic during the normal loading process, with no impact on loading speed or machine productivity.

Summarise with AI

Yes. SmartTech Australia is the authorized Loadrite dealer in Australia with NMI accredited technicians based in Queensland, New South Wales, Victoria, Western Australia, Northern Territory, and Tasmania. We supply, install, commission, calibrate, verify, and service.

The L3180 is currently undergoing NMI (National Measurement Institute) Legal for Trade certification testing in Australia. NMI certification is required when the weight measurement is used for a commercial transaction, such as charging a customer for material by the tonne or issuing a tax invoice based on payload.

Once certified, the L3180 will effectively act as a mobile weighbridge, enabling trucks to bypass the static weighbridge and allowing faster turnaround on high-volume sites. Contact SmartTech Australia for updates on L3180 certification status and availability.

Summarise with AI

The L3180 is compatible with virtually all wheel loader brands and models operating in Australia. This includes Caterpillar, Komatsu, Volvo, Liebherr, John Deere, Hitachi, Doosan, Case, JCB, Hyundai, XCMG, LiuGong, SDLG, Kawasaki, Bell, and many others.

The system is installed with hydraulic pressure sensors on the lift cylinders and 3D IMU angle sensors on the boom. SmartTech Australia will confirm compatibility for your specific machine make, model, and configuration, then provide a detailed quote including installation. Contact us with your loader details for a compatibility assessment and pricing.

Summarise with AI

Both the L3180 and L2180 are NMI Legal for Trade certified loader scales with InsightHQ connectivity and in-cab performance tracking. The key differences are in weighing technology, display size, and feature set.

The L3180 uses dual 3D IMU angle sensors for continuous ground slope compensation while the machine is moving, enabling more accurate weighing on slopes and rough terrain. It includes a 5.7-inch colour touchscreen (twice the size of the L2180's monochrome display), Weight Preview for fast last-bucket adjustments, 90-day transaction memory, eTickets, and Ticket at Gate as standard features. The L3180 also includes built-in GPS for location tracking and loadout activity visualisation in InsightHQ. Note that NMI Legal for Trade certification for the L3180 in Australia is currently undergoing final testing — contact SmartTech for the latest status.

The L2180 is NMI Legal for Trade certified in Australia and uses an optional ground slope compensation kit with a smaller monochrome graphic display. It includes Active Tip-Off and in-cab performance metrics. For operations that need a certified Legal for Trade loader scale today, the L2180 is the proven choice. Contact SmartTech and we will help you decide based on your specific operation.

Summarise with AI

The L3180 is NMI Legal for Trade certified in New Zealand, Canada, the EU, and the UK. Australian NMI certification is currently undergoing final testing. Once approved, the L3180 will be fully Legal for Trade in Australia, enabling it to act as a mobile weighbridge for commercial transactions including charge by weight invoicing.

If you need a Legal for Trade certified loader scale in Australia right now, the L2180 and L2150 are both fully NMI approved and verifiable by SmartTech Australia's licenced technicians. Contact SmartTech for the latest update on L3180 certification status and to discuss the right system for your operation.

Summarise with AI

InsightHQ is Loadrite's web-based fleet management and reporting portal. With optional WiFi and cellular connectivity modules, the L3180 can sync transaction records, production totals, and performance data to InsightHQ automatically. All data is accessible from any web browser or mobile device.

Site managers and fleet owners can view real-time production data including tonnes per hour, truck counts, and daily totals per loader. Historical reports can be exported for invoicing or audit purposes. The L3180's built-in GPS enables a loadout activity heatmap in InsightHQ, which visualizes where on the site the highest and lowest loading performance is occurring. The L3180 also supports two-way product and data list synchronization, allowing you to manage products and customer lists from InsightHQ and push them to the loader remotely.

Summarise with AI

Yes. The LP950 and LP930 Loadrite in-cab printers connect directly to the L3180 and print time-stamped load dockets on demand. These can show individual load weights, daily customer totals, truck totals, or detailed product summaries, depending on how the system is configured at installation.

The L3180 also supports eTickets (email-based load tickets sent directly from the loader to any email address) and Ticket at Gate workflows. When paired with the LG500 Gateway, the load ticket is sent wirelessly from the loader cab to a remote printer at the site exit. The truck driver collects the docket at the gate without the loader operator leaving the cab and without the truck driver exiting their vehicle. This improves site safety and significantly speeds up truck turnaround on high-volume sites.

Summarise with AI