Your SMART Partner
GKD Safety Control Systems › Series 1H Height Limiter
GKD Safety Control Systems

Series 1H Height Limiter

The GKD Series 1H is a simple, accurate and cost effective height limiting system suitable for self-installation. It protects workers from overhead danger when it is difficult to judge the actual height of the machine from within the cab.

Using a gravity referenced angle sensor mounted on the lifting boom, the Series 1H maintains accurate height limits even when the machine is tilted on an incline. When the pre-set height limit is reached, the system triggers a relay output to cut hydraulic motion on the lift circuit, preventing the boom from exceeding the safe working zone.

Key Specifications
Display
LED with Key Switch
Display Rating
IP64 Rated
Angle Sensor
Gravity Referenced
Sensor Rating
IP67 Rated
Motion Cut
12v or 24v Coils
Mount
RAM Window or Dash
🇦🇺 Authorised GKD Dealer Australia
FAQs
DisplayLED display with integrated key switch, IP64 rated, RAM mount to window or dashboard
Angle SensorGravity referenced angle sensor, IP67 rated
Sensor ReferenceGravity referenced (not machine body), accurate on inclines
Motion Cut OutputRelay operated output, compatible with 12v or 24v hydraulic coils
Output FunctionDrives hydraulic solenoid valve on lift circuit or external alarm or beacon
Kit Contents1x Series 1H kit, 1x in-cab display mount
Additional Requirement1x single motion cut valve (not included)
CertificationsCE marked, CEA certified, ISO 9001
Gravity Referenced AccuracyHeight limits remain accurate even when the machine is working on an incline, unlike sensors referenced against the machine body
Hydraulic Motion CutRelay output drives a hydraulic solenoid valve to cut lift circuit movement the moment the pre-set height is exceeded
External Alarm OutputThe relay output can alternatively drive an external alarm or beacon instead of or in addition to the hydraulic motion cut
Simple Limit SettingThe machine operator sets the desired height limit directly from the in-cab operator station with no specialist tools required
Suitable for Self-InstallationDesigned to be installed by any competent engineer without specialist equipment or programming
Rugged IP RatingsIP64 rated display and IP67 rated sensor for reliable operation in harsh construction and civil environments
Compatible MachinesExcavators, backhoe loaders, telehandlers, tractors, lorry loading cranes and other articulated boom machines
IndustriesConstruction, civil infrastructure, utility maintenance, agricultural
Sensor LocationGravity angle sensor mounted on the primary lifting boom
Display LocationIn-cab, RAM mounted to window or dashboard
Motion Cut ConnectionRelay output wired to hydraulic solenoid valve on lift circuit. Requires 1x single motion cut valve
Voltage Compatibility12v or 24v hydraulic coils
CalibrationOperator sets the height limit directly from the in-cab display
SupportSmartTech Australia field service teams available nationally
Suited for

Construction and Civil Infrastructure, Utility Maintenance, Agricultural Operations, Overhead Powerline Proximity Work, Tunnel and Underground Excavation, Bridge and Low Structure Work, Warehouse and Depot Operations, and any site requiring excavator boom height restriction.

Built for the Job

Simple. Accurate. Reliable.

The GKD Series 1H delivers accurate boom height restriction through a straightforward system any competent engineer can install and any operator can use from day one.

Gravity Referenced Accuracy

The angle sensor references gravity, not the machine body. Height limits stay accurate even when the excavator is working on a slope or uneven ground.

Simple Self-Installation

Designed for installation by any competent engineer without specialist tools or programming equipment. The operator sets the height limit directly from the in-cab display.

Relay Output Flexibility

The relay output drives a hydraulic solenoid valve to cut lift circuit motion at the height limit, and can also drive an external alarm or beacon for added site awareness.

Rugged IP Ratings

The in-cab display is IP64 rated and the gravity angle sensor is IP67 rated, providing reliable performance in dust, mud, water and the harshest construction environments.

Frequently Asked Questions

GKD Series 1H Height Limiter

Common questions from site managers, safety officers and plant operators about the GKD Series 1H Height Limiter supplied by SmartTech Australia.

The Series 1H uses a gravity referenced angle sensor mounted directly on the lifting boom. As the boom rises, the sensor continuously monitors the angle relative to gravity. When the boom reaches the pre-set height limit, the system triggers a relay-operated output which drives a hydraulic solenoid valve to cut movement on the lift circuit, preventing the boom from rising further.

Because the sensor references gravity rather than the machine body, height limits remain accurate even when the machine is working on an incline. The relay output can also drive an external alarm or beacon in addition to, or instead of, the hydraulic motion cut. The operator sets the desired height limit directly from the in-cab display with no specialist tools required.

Summarise with AI

Yes. This is one of the key technical advantages of the Series 1H. The system uses a gravity referenced angle sensor rather than a sensor referenced against the machine body. When a machine is tilted on an incline, a machine-body referenced sensor would change its measurement as the chassis tilts, meaning the height limit could be inaccurate.

Because the Series 1H sensor always references true gravity, the height limit remains consistent and accurate regardless of the slope the machine is working on. This makes it particularly well suited to civil construction, earthworks, and drainage sites where machines regularly operate on graded or uneven terrain near overhead powerlines or structures.

Summarise with AI

The Series 1H has been developed for use across construction, utility maintenance and agricultural industries. It is suitable for any machine with a single articulated lifting boom including tracked excavators, wheeled excavators, backhoe loaders, telehandlers, tractors with loader arms, and lorry loading cranes.

The system is compatible with both 12v and 24v hydraulic coils, covering the full range of machine electrical systems found across Australian civil, mining and agricultural fleets. If you are unsure whether the Series 1H is suited to your specific machine make and model, contact SmartTech Australia and our team will confirm compatibility before supply.

Summarise with AI

SmartTech Australia is the authorised GKD Technologies dealer across Australia, supplying and supporting the full GKD Series 1 and Series 2 range including the Series 1H Height Limiter. We have offices and field technicians based in Brisbane, Townsville, Sydney, Melbourne and Perth.

All Series 1H systems are supplied with full installation documentation and technical support. SmartTech Australia can arrange delivery nationally. For sites requiring on-site installation and commissioning, our technicians are available across Queensland, New South Wales, Victoria and Western Australia. Contact SmartTech Australia via the enquiry form on this page or call 1800 655 860 to discuss your requirements and request a quote.

Summarise with AI

Operating an excavator near overhead powerlines or other elevated obstructions without a height limiter creates a foreseeable and potentially fatal risk. Contact between an excavator boom and an energised overhead conductor can cause instant electrocution of the operator and any workers in proximity, damage to electrical infrastructure, and widespread service disruption. These incidents occur when operators misjudge clearance distances, when site conditions change during a shift, or when fatigue reduces situational awareness.

WorkSafe Queensland and SafeWork NSW have both published incident alerts and compliance findings relating to excavators contacting overhead powerlines and structures on Australian sites. Under the Work Health and Safety Act 2011, a PCBU who allows an excavator to operate in proximity to overhead hazards without engineering controls in place may face significant penalties following a regulator investigation. Where an engineering control such as a height limiter was available and not fitted, this will be a central finding of any investigation. See the WorkSafe QLD incident alerts for documented cases. Contact SmartTech Australia to discuss fitting a Series 1H to your machine.

Summarise with AI

Yes. A Safe Work Method Statement for high risk construction work involving an excavator operating near overhead powerlines must identify the engineering controls in place to manage the risk. The Safe Work Australia Code of Practice: Managing Risks of Plant in the Workplace identifies engineering controls as a higher order control than administrative measures or PPE under the WHS hierarchy of controls.

A fitted and operational GKD Series 1H height limiter is an engineering control. Including it in the SWMS engineering controls section, along with the system model, the pre-set height limit configured for the site, and any relevant clearance distances, directly satisfies this requirement. It also provides documented evidence that the PCBU has taken reasonably practicable steps to control the risk, which is critical if the site is inspected by a regulator or an incident occurs. SmartTech Australia can provide installation records and system documentation to support your SWMS and site safety file. Contact SmartTech Australia for supply and installation.

Summarise with AI