BMair
Connect
Automatic compliance logging, RFID filter tracking, real-time cabin pressure monitoring, and fleet-wide reporting. No manual input required. Always audit-ready.
Contact SmartTech Today
One System.
Complete Compliance Coverage.
BMair Connect is the digital compliance system built into the new BMair controller generation. It combines a touchscreen controller installed in the machine cab with a 24/7 online portal accessible from any device. Together they eliminate manual record-keeping and give safety managers real-time visibility across every machine in the fleet.
From the moment a compatible system is commissioned, BMair Connect starts building a complete, automated compliance record. Every filter installation is detected and logged via RFID. Cabin pressure is monitored continuously and every reading is stored. Any pressure drop is recorded with a timestamp. No operator action is required at any point for this logging to occur.
For a safety manager facing a WorkSafe inspection, mine site audit, or internal safety review, the full documentation package is available for download immediately from the portal. No manual compilation, no chasing paperwork, no gaps in the record.
Every BMair filter carries an embedded RFID chip. Installation is detected and logged automatically with filter serial number, machine ID, date, and time. No scanning or manual entry required.
Cabin pressure is monitored continuously. Any drop below the 50 Pa threshold triggers an in-cab alert and a logged pressure event in the portal, timestamped with duration.
From commissioning, BMair Connect builds a complete compliance record for every machine. Filter history, pressure data, and inspection certificates are stored and downloadable at any time.
All machines on one screen. View filter status, pressure history, and upcoming replacements across your entire fleet from the portal, from any device, at any time.
What the Controller Does in the Cab
The BMair Controller is the hardware link between the filtration unit and the Connect portal. It is installed inside the cab and powers on automatically with the machine. The operator does not need to interact with it for the system to work.
The controller continuously monitors cabin pressure and automatically adjusts the system output to maintain the minimum required level. It increases or decreases fan speed as needed without operator input.
Orange notifications flag conditions that need attention. Red alarms indicate an issue requiring immediate action. Both are logged in the portal with timestamps. Operators always know the system status at a glance.
If the 4G connection is lost, the controller stores all data locally. Once the connection is restored, everything is automatically synced to the portal. No data is ever lost due to connectivity gaps on remote sites.
When a filter is installed, the controller reads its RFID chip immediately and registers it in the portal. Filter serial number, type, and timestamp are recorded without any operator action.
Click to watch overview
24/7 Access to Your Compliance Data
The BMair Connect portal gives safety managers and fleet managers a single place to monitor every system, access every record, and download every certificate. No software to install. Log in from any device at any time.
Cabin pressure data for every machine displayed in real time. Pressure events, drops, and recovery periods are plotted with timestamps.
Every filter installation for every machine stored in a searchable log. Serial number, type, date, and time recorded automatically via RFID.
After each annual service, SmartTech technicians generate a compliance certificate via the BMair App. Stored in the portal and available for download at any time.
All machines on one screen. Identify upcoming filter replacements, pressure events, and system health issues across your entire fleet without visiting site.
Need CO₂ monitoring in the cab? The BMair Connect plug-and-play sensor provides real-time cabin CO₂ readings. It has a one-year lifespan and is easily replaceable. Ask SmartTech Australia about adding a sensor to your system.
BMair Connect Works With
BMair Connect is part of the new BMair controller generation. It is compatible with the Protector, Protector Plus X, and MAO-3C Cab Guard. Each of these units ships with the BMair Controller included as standard.
Compact 9 kg HEPA 13 dust filtration. Mounts horizontally or vertically on any machine. The modular base unit of the BMair system.
View Product
Full dust and gas protection. HEPA 13 plus 11 kg activated carbon. Roof mounted. Ideal for waste, composting, and remediation sites.
View Product
Self-cleaning HEPA filtration for deck and fender mounting. Six filter combinations for complex contamination profiles.
View ProductBMair Connect
Everything you need to know about the controller, the portal, RFID tracking, and how BMair Connect supports Australian compliance requirements.
BMair Connect works exclusively with the new BMair controller generation: the BMair Protector, BMair Protector Plus X, and BMair MAO-3C Cab Guard. All three ship with the BMair Controller included as standard.
The F20, F33, and F33-R use the F4000 Smart Control, which has its own real-time pressure monitoring and 4G data logging but does not connect to the BMair Connect portal. Contact SmartTech Australia if you need help choosing the right system for your fleet.
From the moment a compatible system is commissioned, BMair Connect automatically records the following without any operator or manager action:
- Every filter installation: logged via RFID with filter serial number, filter type, machine ID, date, and time
- Continuous cabin pressure readings: monitored around the clock and stored in the portal
- All pressure events: any drop below the 50 Pa threshold is recorded with timestamp and duration
- End-of-life alerts: recorded when the filter is approaching its pressure limit
Annual inspection certificates are generated by SmartTech technicians after each service and stored in the portal for download.
Every genuine BMair replacement filter contains a patented embedded RFID chip. When a new filter is inserted into a compatible system and the unit powers on, the BMair Controller reads the chip automatically. No barcode scanning, QR reading, or manual entry is involved at any point.
The filter data including serial number, type, and manufacturing details is pushed to the BMair Connect portal via 4G, timestamped, and linked to the machine record. The system then monitors pressure continuously and generates an end-of-life alert when the filter is nearing its limit, which is also logged. If a filter without a valid RFID chip is installed, the system will flag it.
No data is lost. If the 4G connection drops, the BMair Controller stores all pressure readings, filter events, and alerts locally on the unit. Once the connection is restored, all data is automatically synced to the BMair Connect portal in full. The compliance record has no gaps regardless of connectivity on remote or underground sites.
Australian Work Health and Safety regulations require employers to demonstrate that dust control measures are operating effectively and properly maintained. A WorkSafe inspector or mine site auditor will typically want to see evidence of regular filter changes, records showing the system operated at positive pressure, and documentation of any service performed.
BMair Connect provides all of this without any manual preparation. From the portal you can immediately produce the filter change history for any machine, the pressure data confirming the system operated above 50 Pa, a log of any pressure events and when they were resolved, and the current inspection certificate. Every record carries an automated timestamp and cannot be backdated or altered, which makes the documentation credible as well as convenient. Compatible systems also support compliance with the Australian ISO 23875 standard and, for Queensland coal mine operations, RS20.
Yes, certificates can be downloaded at any time. After each annual inspection, a SmartTech authorised technician generates a compliance certificate directly from the BMair App. The certificate is stored in the portal under the relevant machine record and is available for download immediately from any device.
Portal access is included when you purchase a compatible BMair system through SmartTech Australia. Contact SmartTech for full details on portal access, fleet setup, and ongoing service arrangements for your site.