How does AI collision prevention work on mining equipment?
Cameras on the machine feed live video to an onboard AI processor that classifies what it sees as a person, vehicle or other object. When a person or vehicle enters a set zone, the operator gets a visual and audible warning, and the system can link to machine controls. No tags are needed on workers.
Large mining equipment has blind spots that mirrors and cameras alone cannot cover reliably. Spotters and training help, but they depend on people watching the right place at the right moment.
This guide explains how AI vision detection works, where it fits in underground and surface mining, and what to look for. AI detection is one of the vehicle controls in our heavy plant safety overview.
Key takeaways
- AI classifies, not just detects, so a person is not confused with a rock or a pole.
- No tags needed, so visitors and contractors are protected too.
- Fewer nuisance alarms keep operators trusting the system.
- Retrofits suit mixed fleets of loaders, trucks and light vehicles.
AI proximity detection
See AI detection on a machine like yours
Book a demo and our team will show you how AI vision detection works on equipment like yours and what installation involves.
No obligation, just a real conversation about what you need.
Why traditional controls reach their limit
Mirrors, reversing cameras and spotters all rely on human attention. In dust, at night or during a busy load cycle, attention is stretched. The national plant safety guidance places engineering controls above administrative controls such as procedures and spotters, because they work regardless of who is watching.
How AI vision detection works
- Cameras mount to the machine in single, dual, triple or full surround layouts to cover blind zones.
- An onboard processor runs the AI model locally, so detection does not depend on a network.
- Objects are classified as people, vehicles or other objects, rather than treated as generic movement.
- Zones are configured to suit the machine and task, with warnings as a person or vehicle approaches.
- Outputs can link to machine controls, for example to inhibit movement until the zone is clear.
Underground and surface applications
Underground, confined drives and poor lighting make detection harder and the consequences of a missed person greater. Surface operations face long reversing cycles, mixed fleets and frequent visitors. Correct AI’s PROX-EYE range is offered in ECO, ECO PLUS and ULTRA variants to suit different machines and levels of integration.
An underground contractor’s experience with PROX-EYE shows how restart time was cut after each trip from minutes to seconds, and our guide to quarry proximity detection covers the quarry setting.
How AI compares with other methods
Tag based systems only detect people wearing tags, and radar detects objects without telling a person from a berm. Our comparison of proximity detection methods sets out the strengths and limits of each. On the largest machines, our dragline and shovel collision avoidance guide covers longer range systems.
What to check before you choose
- How well does the system classify people in dust, rain and low light?
- Can detection zones be set per machine and task?
- Can it integrate with machine controls where needed?
- How is it supported and updated in remote locations?
- What does the false alarm rate look like after calibration?
Queensland’s QGN 27 collision prevention guidance is a useful reference when assessing vehicle interaction controls.
No. AI vision detects people from the camera image, so anyone in the zone is detected, including visitors and contractors who are not carrying a tag.
Yes. Systems designed for underground use process images on the machine without needing a network, and zones are set to suit confined drives and workshop areas.
Many systems can link to machine controls to slow or inhibit movement when a person is detected in a set zone, in addition to warning the operator.
Protect people the operator cannot see
AI collision prevention adds an engineering control that keeps watching when people cannot. Choose a system that classifies reliably in your conditions, configure zones to suit each machine and keep false alarms low. It then works alongside cab air and edge protection, as set out in our Protect pillar.
Contact STA today
Written by
Anthony Laverty
Marketing Specialist, SmartTech Australia
Anthony works alongside SmartTech Australia’s field technicians and product specialists to explain the technology fitted to mining, quarrying, civil and waste fleets across Australia, from payload weighing and cab air filtration to proximity detection and site networks. Before joining STA he served six years in the Australian Army, including operational deployments.